Dust Management Systems for Construction & Renovation

The ZHP Truck-Mounted Transfer System simplifies the introduction of ZHP Water Wetter into water trucks used for dust control. For trucks under 10,000 gallons, Zircon Industries offers compressed-air and 12 VDC diaphragm-pump options that reduce the need to manually carry product up the truck ladder. For trucks over 10,000 gallons, custom 120 VAC or 480 VAC systems can be installed at the fill site to add ZHP during the filling process.

Zircon Industries commonly specifies **1 gallon of ZHP Water Wetter per 2,000 gallons of water** for the truck-mounted transfer system. The broader product guidance allows a ratio of approximately 1 part ZHP to 1,500-3,000 parts water, depending on the application and operating conditions. The transfer system makes product introduction faster and more consistent than manually measuring and carrying ZHP to the top of each water truck. Follow Zircon Industries' guidance when setting the final concentration for your site.

Yes. For trucks under 10,000 gallons, Zircon Industries offers compressed-air-operated or 12 VDC motor-driven diaphragm-pump configurations. These systems can be mounted to the truck and permanently plumbed into its water tank. For trucks over 10,000 gallons, Zircon Industries offers custom 120 VAC or 480 VAC pump systems positioned at the fill site. ZHP Water Wetter is then introduced near the end of the truck-filling cycle.

These dust management systems support routine watering programs across gravel work areas, construction staging zones, loading areas, trucking yards, disturbed soil, aggregate handling areas, and other dust-prone industrial surfaces. ZHP Water Wetter helps treated water spread and penetrate the surface more effectively, improving dust control without relying on water alone. ZHP can also be introduced into water systems used for asphalt milling dust control. Application methods and rates should be matched to the equipment, material, and dust source at the specific site.

Yes. For trucks under 10,000 gallons, the ZHP Truck-Mounted Transfer System can include a custom mounting bracket, intake hose, quick connect, suction bar, and permanent plumbing into the water tank. For larger trucks, Zircon Industries can provide custom 120 VAC or 480 VAC fill-site pump configurations. Contact Zircon Industries at 800-547-4328 to discuss truck capacity, available power, fill-site layout, mounting requirements, and the appropriate system configuration.

Construction and demolition contractors, asphalt milling crews, mining and aggregate operations, quarries, steel plants, utility sites, trucking yards, lumberyards, and bulk material handling facilities can benefit from Zircon Industries dust management systems. These operations regularly manage dust across gravel surfaces, loading areas, staging zones, disturbed ground, material transfer areas, and other high-activity industrial locations where water alone may provide limited coverage and penetration.