Electric Motor Cleaning Solvents

Dielectric cleaning fluids like the Z99 Safety Solvent Degreaser (36,000 volts, ASTM D-877) and ZL98 High Purity Contact Cleaner (18,000 volts) are purpose-built for electrical equipment. These non-conductive solvents safely flush contaminants from circuits, contacts, relays, and motor components without conducting electricity or posing a fire risk.

Z99 Safety Solvent Degreaser and ZL98 High Purity Plastic Safe Contact Cleaner are non-conductive, non-flammable, and tested for dielectric strength. Z99 is rated to 36,000V under ASTM D-877, and ZL98 is rated to 18,000V. Both are positioned for electrical cleaning applications, including energized-equipment use, but users should follow product labels, SDS guidance, lockout/tagout rules, and facility electrical safety procedures.

The ZL98 High Purity Plastic Safe Contact Cleaner is specifically formulated and tested to be safe on a wide range of materials including PTFE, PVC, ABS, Neoprene, Silicone, Nylon, Polypropylene, and Polyurethane. Always consult the product's technical data sheet for full material compatibility before use on sensitive components.

No. Z99 Safety Solvent Degreaser and ZL98 High Purity Plastic Safe Contact Cleaner are self-evaporating cleaners that leave no residue after drying. Return-to-service timing should still follow the product label, SDS, equipment requirements, and facility maintenance procedures.

Z99 Safety Solvent Degreaser is available in 12 x 20 oz aerosol cans per case, 5-gallon pails, and 55-gallon drums. ZL98 High Purity Plastic Safe Contact Cleaner is available in 12 x 16 oz aerosol cans per case. Contact Zircon Industries at 800-547-4328 for pricing and availability.

Compliance and environmental claims vary by product. Z99 Safety Solvent Degreaser contains no petroleum distillates and no ozone-depleting chemicals, is approved for industrial use across all 50 U.S. states, and has a GSA Canadian Compliant Label available. ZL98 High Purity Plastic Safe Contact Cleaner is non-flammable, rapidly evaporating, and leaves no residue. Customers should review product labels, SDS materials, and site-specific requirements before making compliance decisions.