Environmentally Friendly Dust Control Solutions

Duration varies by product, surface condition, traffic, weather, application rate, and site use. Glycerin DC-100 lasts approximately 3–4 weeks per application on unpaved roads, with subsequent applications providing residual enhancement. RDS38 Road Dust Stabilizer lasts approximately 3–4 months per application. Latex 100 Static Dust Control Sealant is designed for undisturbed static areas and pile surfaces. Depending on dilution ratio and site conditions, it can provide short-term sealing for weeks to months or long-term storage protection for 8 to 18 months.

RDS38 Road Dust Stabilizer is built for demanding road dust-control applications in industries such as mining, aggregate, trucking, and lumber yards. Zircon delivers and applies RDS38 as a turnkey service, with one application lasting approximately 3 to 4 months. RDS38 continually pulls in and retains moisture in the road base, helping control old and new dust as traffic packs fines back into the road. It is also reinvigorated by moisture in the atmosphere and rain, helping support a hard-packed road base with reduced grading, road filling, and watering needs.

Application method depends on the product. Glycerin DC-100, ZHP Water Wetter, and Latex 100 can be applied as part of site-managed dust-control programs using appropriate spray or watering equipment. RDS38 Road Dust Stabilizer is delivered and applied by Zircon as a turnkey service. The ZHP Truck-Mounted Transfer System helps water truck operators introduce ZHP Water Wetter into water trucks without labor-intensive manual mixing, supporting more consistent product introduction during routine watering programs.

Dust-control compliance depends on the product, application, site conditions, exposure-control method, local requirements, and documentation. RDS38 Road Dust Stabilizer supports proactive road dust-control programs for sites managing dust concerns, road maintenance, and surrounding-community impact. For applicable OSHA 1926.1153 Table 1 asphalt milling machine applications, water must be combined with a surfactant. ZHP Water Wetter is designed for dust-control programs where water is combined with a surfactant to improve coverage, penetration, and moisture retention.

Zircon dust control solutions support mining, aggregate and quarry operations, trucking yards, lumber yards, construction sites, steel plants, utility operations, municipal road maintenance, industrial sites, and unpaved-road maintenance programs. Product selection depends on the application. ZHP Water Wetter supports routine water-based dust-control spraying, Glycerin DC-100 supports do-it-yourself unpaved-road dust control, RDS38 supports heavy-traffic road dust stabilization through Zircon's turnkey service, and Latex 100 supports static piles, open lots, railcar tops, fly ash areas, coal, iron ore, and aggregate surfaces that will remain undisturbed.

Packaging options vary by product. Glycerin DC-100 is available in 330-gallon totes. ZHP Water Wetter is available in 5-gallon pails, 55-gallon drums, 330-gallon totes, and tank orders with a minimum of 1,500 gallons. Latex 100 is available in 55-gallon drums, 330-gallon totes, and full tank loads with a minimum of 4,500 gallons. Contact Zircon Industries at **800-547-4328** for current pricing, packaging availability, freight options, SDS documentation, and application guidance.